Leaf User Manual
P/N: 97-4000, Revision 08, Release date: 2020-11-10 Page 35 of 85
Between Patient Treatments
At the completion of each patient treatment:
1.
Press “End” to exit the Treatment screen and all settings return to default.
2.
Disinfect the chin rest and head rest using mild soap and water following standard disinfect
procedures. Dry with a soft cloth.
3.
Disinfect the contact lens following the contact lens manufacturer instructions.
System Shut-down
At the end of the day, or during an extended period of inactivity:
1.
Shut down Norlase Leaf as described in “Shutting Down the System”.
2.
Remove the key to prevent unauthorized use of the system.
3.
Clean the system as described in “Inspection and Cleaning”.
4.
Place a dust cover over the slit lamp.
Annual Maintenance
Preventive maintenance, safety, power and calibration checks may be performed
annually. Maintenance shall only be performed by Norlase-certified personnel to ensure
proper laser performance.
System Repair
All Norlase Leaf repairs must be performed by Norlase-certified personnel to ensure
proper system performance.
WARNING: System repair or alterations performed by untrained personal may cause
harm both during repair and in future operation. Unauthorized repair immediately voids
system warranty and may affect system safety and performance.
Inspection and Cleaning
The following procedures can be performed by the user to ensure proper performance of
Norlase Leaf. During inspection and cleaning, the system shall be disconnected from the
AC wall power outlet.
Cleaning the Console External Surfaces
Clean the external surfaces of the console daily, after use. Use a cloth dampened
with a non-caustic cleaning solution (e.g., soap and water) to clean the external non-
optical surfaces of the console as needed. Dry with a clean cloth or allow to air dry.
Do not spray or pour cleaning agents directly onto the console.
To Next Page
Loading...