Leaf User Manual
P/N: 97-4000, Revision 08, Release date: 2020-11-10 Page 58 of 85
Electrical Hazards
To avoid the risk of electric shock, this equipment must only be connected to a supply
main with protective earth. Hospital Grade Cord grounding reliability can only be
achieved when equipment is connected to an equivalent receptacle marked “Hospital
Grade” or “Hospital only”.
To avoid the risk of electric shock, do not touch any external connector and the patient
simultaneously.
Do not use power cables other than the power cable provided with the system. Do not
use extension cables with the system.
Disconnect the laser system from the electrical outlet when inspecting the fuses.
Never open the laser console protective covers. Opening the covers will expose you
to high voltage components, the laser resonator and possible laser radiation. Only
certified personnel shall work inside the console.
The area around the laser and footswitch shall be kept dry. Do not operate the laser if
any of the cords are faulty or frayed. The laser should undergo routine inspection and
maintenance per the Norlase manufacturer's recommendation and institutional
standards.
Although not required for the operation of the equipment, an additional staff member
trained in CPR should be present any time equipment is used utilizing line voltage
power.
Do not pull or stress any cables. Do not exceed bend radius of
15cm Do not set items on or under the cable assembly.
To Next Page
Loading...
