Leaf User Manual
P/N: 97-4000, Revision 08, Release date: 2020-11-10 Page 41 of 85
Troubleshooting Guide
If the instrument fails to operate properly, this troubleshooting guide will help you to
locate and correct the malfunction. Should a major malfunction occur, contact Norlase
Technical Support or your authorized Distributor. Please note any messages or Error
Codes the system may display. This will aid in the diagnosis and servicing of the
equipment.
If the system fails to turn on please check for the following items. If none of
these solutions remedies the problem, consult the Troubleshooting Guide, call
Norlase Technical Support or your local authorized Distributor:
1.
Verify that the wall circuit breaker is in the ON position.
2.
Verify that the power cable is correctly attached to the system and the wall outlet.
3.
Verify that the system Key switch is in the “I” (ON) position.
4.
Verify that the door interlock plug is securely connected and, if a door interlock
is in use, that the door switch is closed.
5.
Verify that the footswitch cable is securely connected.
6.
Verify that the User Interface Control tablet is powered on and connected with the laser
console.
7.
Verify that the emergency laser stop button is not activated.
To Next Page
Loading...
