Page 76 of 488 Rack-mounting the components
553-3041-210 Standard 4.00 September 2007
Note 1: Leave wall space for the cross-connect terminal.
Note 2: Position the rack so that you have access to both the front and
rear.
Rack-mounting a CS 1000E Call Server
Items required
The following items are required to mount a CS 1000E Call Server in a
19-inch rack:
• equipment layout plan
• 4 – #10-32 machine screws. Use the screw type recommended by the
manufacturer of the equipment racks
.
CAUTION — Damage to Equipment
The CS 1000E Call Server chassis is constructed of
light-weight aluminum. It can be damaged if the unit is
lifted from the shipping box by its top plate.
To Next Page
Loading...
