Page 356 of 488 Installing the Main Distribution Frame
553-3041-210 Standard 4.00 September 2007
Installing a Krone Test Jack Frame for the UK
The Krone Test Jack Frame provides terminating strips that hold ten pairs of
cable. Generally, only eight of ten pairs are used. As a result, one 25-pair
cable requires three terminating strips (8 pairs/strip x 3 strips = 24 pairs).
Figure 123 on page 357 shows how one 25-pair cable is divided among three
terminating strips on the Krone Test Jack Frame.
To Next Page
Loading...
