Nortel 7 - Page 159

Chapter 8 Configuring IPSec mobility and persistent mode 159
Nortel VPN Router Configuration — Basic Features
To enable IPSec mobility:
CES(config-group/ipsec)#mobility enable
To disable IPSec mobility:
CES(config-group/ipsec)#no mobility enable
To enable persistence:
CES(config-group/ipsec)#persistence enable
To disable persistence:
CES(config-group/ipsec)#no persistence enable
To change the maximum roaming time to, for example, 210 seconds:
CES(config-group/ipsec)#max-roamingtime 210
To change the persistence time to, for example, 1000 minutes:
CES(config-group/ipsec)#persistent-time 1000
To exit the IPSec group configuration mode:
CES(config-group/ipsec)#exit