34 Chapter 2 Getting started
NN46110-500
Configuring MVA with the serial menu
To configure the MVA with the serial menu:
1 Connect the serial cable (supplied with your Nortel VPN Router) from the
Nortel VPN Router serial port to a terminal or a communications port of a PC.
2 Power on the terminal or PC.
3 Using a terminal emulation program, such as HyperTerminal on the PC, press
Enter. Your terminal emulator must use the following communications
parameters:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• No flow control
The Welcome window appears and you are prompted to supply a user name
and password.
Welcome to the Nortel VPN Router
Copyright 1999,2000,2001 Nortel Networks
Version: V07_00.140
Creation date: Jan. 7, 2007, 20:51:06
Date: 04/27/2007
Unit Serial Number: 17563
4 Enter the administrator's user name, admin.
5 Enter the administrator's password,
setup.
Note: The factory default user name is admin and the default password
is setup.
To Next Page
Loading...
