Nortel 7 - Page 49

Chapter 2 Getting started 49
Nortel VPN Router Configuration — Basic Features
8 Select 0 and press Enter to enter the Slot 0, Port 1, Private LAN menu and
add the interface IP address.
Please select a menu choice: 0
0) Slot 0, Port 1, Private LAN
IP Address = 47.17.163.163
Subnet Mask = 255.255.255.240
Speed/Duplex = AutoNegotiate
* Type 0.0.0.0 to delete.
* Just type <CR> to skip.
Old IP Address = 47.17.163.163
New IP Address =
9 Enter a new IP address for the interface or press Enter to leave the current
value. The subnet mask menu appears.
Old Subnet Mask = 255.255.255.240
New Subnet Mask =
10 Enter the desired subnet mask and press Enter. The Interface option menu
appears. Select the desired option and press Enter.
No change to IP Address
Old Speed/Duplex = AutoNegotiate
1) AutoNegotiate (Default)
2) 100<Mbs-FullDuplex
3) 100Mbs-HalfDuplex
4) 10Mbs-FullDuplex
5) 10Mbs-HalfDuplex
<CR> Leave unchanged
Please select a menu choice (1-5, <CR>):
11 After you complete the configuration, press Enter to return to the Interface
menu.
12 Type R and press Enter to return to the main menu.
13 Type E and press Enter to save the settings and exit. You can then manage the
Nortel VPN Router from a Web browser.