Nortel M2016S - Enable the call timer

Your set’s display
18
Enable the call timer
To enable the call timer:
Idle screen format
Follow these steps to determine how your idle screen will look:
P
1. Press the Program key.
2. Press
‚ then ‹.
®
3. Press the Volume Control bar to toggle
between CALL TIMER ON and CALL TIMER
OFF.
P
4. Press the Program key when the
desired status is visible.
P
1. Press the Program key.
2. Press
‚ then ›. IDLE FORMAT is
displayed along with your current
selection.
®
3. Press the Volume Control bar to scroll
though the various formats until you find
the one that you like best.
P
4. Press the Program key.