Talking with more than one person
70
If the person you are adding to the conference is not available:
Selectable Conferee Display and Disconnect
You can view the list of active conferees by using the Conferee
Selectable Display key and disconnect any party that has been added to
the conference call. This feature is not available on the MSL-100.
To view active conferees:
®
1. Press Release.
∫ 2637
2. Press the DN key with the flashing º.
∫Conf Display
1. While on a conference call, press the
Conferee Selectable Display key. The
LCD indicator º turns on. With each key
press, the screen changes to show a
different active conferee.
Note: This action has no effect on the
displays of the other sets involved in the
conference.
®
2. Press the Release key. If configured, the
Conference Count Display returns. The
LCD indicator º turns off.
To Next Page
Loading...
