Making a call
41
Special Radio Paging features
If you carry a Radio Pager, you receive a paging indication when another
set user accesses the Radio Paging system and dials your DN.
If the Radio Paging system is set up to function in “Meet - me” mode, you
can answer the paging call from any DN and be connected to the person
who has paged you.
To use Radio Paging Answer:
2. Dial the Radio Paging Access FFC. You
hear a ringback tone.
There is no need to redial the DN number of
the called party to page them.
While ringback is heard, the person you
have paged can proceed to any DN and
enter a Radio Paging Answer code plus their
own DN to be connected directly to you.
If your call is not answered within a preset
time period you hear a continuous
high-pitched tone for fifteen seconds, then
silence. Replace the handset or press
Release and try again later.
1. Lift the handset or press a DN key on
any set on the system (as long as it is
not a hot line, private line, or manual line
set). You hear dial tone.
2. Dial the Radio Paging Answer FFC. You
hear paging tone.
To Next Page
Loading...
