Nortel M2016S - Your sets features; Initiating calls

Your set’s features
21
Your set’s features
Your system administrator assigns features to your programmable feature
keys. Whenever this guide describes a procedure that requires special
codes or passwords, ask your system administrator to provide these to
you.
To use a feature, you will be instructed to press a feature key, or enter an
FFC code. You may be provided with Flexible Feature Codes (FFCs),
which you will need to use some features.
Not all features are available in your area and some require additional
equipment.
Initiating calls
Use one of the following methods to initiate a call from your M2016S
Secure Set:
∫ 2637
• Press the DN key.
• Lift the Handset.