During a call
51
If the transferred call is not answered, your set rings:
If the person to whom you are transferring the call answers while you are
on the line, a conference call is set up among the three parties. Replace
the handset or press Release to complete the transfer. Check with your
system administrator about the length of your recall timer.
Auto Dial Transfer
Auto Dial Transfer enables you to use your Auto Dial key to transmit
digits to the central office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call with a CO that offers Centrex-
or exchange line-type features.
To use Auto Dial Transfer when you pick up an incoming trunk call:
1. Lift the handset or press a DN key. You
are connected to the original caller. The
extension to which you transferred the
call continues to ring.
†
2. Press Transfer and repeat the transfer
(to a different DN), if desired.
1. Press Trunk Switchhook Flash and
wait for interrupted dial tone.
ç
2. Press Auto Dial to call the desired
number.
3. Replace the handset or press Release
to end the call.
Trunk Switchook Flash
To Next Page
Loading...
