During a call
52
Call Park
Call Park enables a call to be held temporarily and then to be retrieved
from any other DN. You can park an incoming call and then page the
called party, without tying up a line. Your office may have a System Park
DN where most calls are automatically parked.
If configured networkwide, Call Park can be used across networks.
To park a call on the System Park Extension or your own DN:
To park a call on a DN other than the System Park Extension or your
own DN:
¢
¢
Press Park twice. If there is a System Park
DN, the call is parked on it. Otherwise, it is
parked on your DN.
Note: For MSL-100, press Park once to
park the call.
¢
1. Press Park.
2. Dial the DN.
¢
3. Press Park again.
Note: MSL-100 uses Directed Call Park
(DCPK).
To Next Page
Loading...
