Nortel M2016S - Page 53

During a call
53
To park a call using the SPRE code or FFC:
To retrieve a parked call:
† or ø
1. Press Transfer or Conference.
2. Do one of the following:
• Dial the SPRE code followed by
‡⁄.
• Enter the Call Park FFC.
3. To park the call against a specific DN,
dial that DN.
† or ø
4. Press Transfer or Conference again.
Note: MSL-100 uses Conference only.
1. Lift the handset or press a DN key.
¢
2. Do one of the following:
• Press Park.
• Enter the SPRE code followed by
‡¤.
• Enter the Call Park FFC.
3. Dial the DN where the call is parked.