Making a call
33
Override
You can override a busy signal and interrupt another call. This feature is
called Busy Override on the MSL-100.
To override a busy/engaged signal:
Override, Enhanced
Enhanced Override enables you to override an ongoing call after you
have attempted a Forced Camp-on. Use Enhanced Override when
making either a simple call or a consultation call (for example, place a call
on hold and call another party).
To use Enhanced Override:
1. You dial a telephone number and
receive a busy signal.
£
2. Press Override. The people on the call
in progress hear a tone for
approximately one second; the three of
you are then connected together. A short
tone repeats every 16 seconds.
1. You dial a telephone number and
receive a busy signal.
£
2. Press Override to initiate a Forced
Camp-on. If either of the people on the
call disconnects at this time, you receive
a fast busy signal.
To Next Page
Loading...
