Talking with more than one person
71
To disconnect a conferee:
∫Conf Display
1. While on a conference call, press the
Conferee Selectable Display key. The
LCD indicator º turns on. Continue to
press the key until the conferee that is to
be disconnected is displayed on the
screen.
∫ 2637
2. Press the DN key on which the
conference call is established. The
selected conferee is disconnected from
the call.
∫Conf Display
3. If there are additional conferees to be
disconnected, press the Conferee
Selectable Display key until the
conferee that is to be disconnected is
displayed on the screen.
®
4. Press the Release key. If configured, the
Conference Count Display returns and is
updated to reflect the revised total count
of conferees. The LCD indicator º turns
off.
To Next Page
Loading...
