34 Chapter 2 Customizing the client
311644-J Rev 00
AddDesktopShortcut=1 If set to 1, a shortcut is added to the Desktop for the
client. The default is 0 and the shortcut is not
created.
CustomReadme If set to 1, the switch will overwrite the existing
readme.txt file with a customized readme.txt file. The
readme.txt file must be in the installation directory
where the setup.exe file was placed. The default is 0
and the existing readme.txt file remains.
DisableAutoConnectOverRide=1 If set to 1, a user cannot disable this feature from
their clients. This feature can be overridden from the
client. If the server has the AutoConnect feature
enabled and a user does not want to use it, they can
choose to disable AutoConnect from the client
Options menu. The default is 0 and the user can
override it.
DisableKeepAlives If set to 1, the menu item will initially be checked. The
default is 0 (False) and the item is not checked.
DisableLoggingConfig=1 If set to 1, you cannot configure logging from client
UI. The default is 0 and allows you to configure
logging.
DisplayPasscode=1 If set to 1, the Passcode screen for tokens is used
instead of the standard token and PIN screen. The
default is 0 and the standard token and PIN screens
are used.
DisplayReboot=0 If SkipScreens=1 and DisplayReboot=0, the Reboot
dialog box is skipped. The default is 0 and it skips the
screens and the reboot screens warns you to reboot
after the client installs.
If SkipScreens=1 and DisplayReboot=0, and
ForcedReboot=1, the Reboot dialog box appears
and then reboots.
If SkipScreens=1 and DisplayReboot=0, and
ForcedReboot=0, the Dialog box appears and
recommends that you reboot.
EnableLogging=1 If set to 1, client is installed with the logging option
turned on. The default is 0 and logging is turned off.
FolderName=Folder Name Creates named folder in the Start Menu. Default is
Nortel Networks.
Table 4 [Options] section and keyword settings for setup.ini file (continued)
Field Description
To Next Page
Loading...
