Chapter 3 Using certificates 81
Configuring the Contivity VPN Client
Use the following edits to enable Proxy Mode (1 line optional):
RoamGetFilesFromServer=<Enable(1) or Disable(0)) Proxy Mode>
Create a Roaming Profile Administrator from RA
Add Roaming Server in Entrust/RA to create its Entrust profile. If you plan to use
multiple servers with a separate profile for each, create a profile for each instance
of Roaming Server before attempting to encrypt for each one.
To add Roaming Server in Entrust/RA:
1 Log in to Entrust/RA. Entrust/RA screen appears.
2 Click Users > New User. The New User dialog box appears.
3 In the Naming property page, select Web Server or Person in the Type
drop-down list. If you choose Web Server, you do not have to enter a first and
last name as you do if you select Person.
4 Type a name for the server in the Name field.
5 Type a description of the server in the Description field.
This information is not mandatory. Use this field to record important
information about Roaming Server (for example, its IP address).
6 In the Add to drop-down list, select the searchbase under which to add the
Roaming Server. By default, CA Domain Searchbase is listed first and is
often the top level searchbase in an organization.
7 Select Create Profile.
8 Click the Certificate info property page.
9 Select Enterprise in the Category drop-down list and click Profile Server
(Profileserver Certificates) in the Type list. Click OK.
Note: Proxy Mode requires additional overhead, so transactions take
considerably longer to authenticate.
To Next Page
Loading...
