40 Chapter 2 Customizing the client
311644-J Rev 00
Quiet mode
In this mode, the user must dismiss the license agreement and then the reboot/
finish dialog. The user can reboot now or at a later time.
In setup.ini set the following:
[Options]
SkipScreens=1
DisplayReboot=1
Reboot Only mode
No license agreement appears, and the reboot/finish dialog appears and must be
dismissed by the user. The user can reboot now or at a later time.
In setup.ini set the following:
[Options]
SkipScreens=1
DisplayReboot=1
SkipLicenseAgreement=1
Silent with Forced Reboot mode
This switch reboots the system immediately after the installation completes. The
forced reboot is only activated when you are running in Skip Screens mode or in
Silent mode. The SkipScreens installation switch must be asserted. You can use
the SkipLicenseAgreement switch with the ForcedReboot switch. It has no effect
on the reboot switch.
In the following case, no license agreement is displayed, and the Contivity VPN
Client setup is completed. The system reboots and the message disappears after 4
seconds.
In setup.ini set the following:
[Options]
SkipScreens=1
ForcedReboot=1
SkipLicenseAgreement=1
To Next Page
Loading...