Nortel VPN Client - Client Logging; Client error messages

85
Configuring the Contivity VPN Client
Appendix A
Client logging
Table 8 describes client error messages.
Table 8 Client error messages
Message Description
LOG_AUTH_FAILED Authentication failed. Check user
authentication parameters.
LOG_CLI_UNKNOWN Command line detected unknown command.
Check command line launch parameters. See
Reference for the Contivity Secure IP Services
Gateway Command Line Interface for further
information.
LOG_CONNLOST_ERROR Connection lost due to unknown error. See the
Contivity Secure IP Services Gateway log for
further information.
LOG_CONNLOST_KEEPALIVE Contivity gateway did not respond to keep-
alives. Connection lost. Check connection to
the Contivity gateway and the dial-up
connection for failure.
LOG_NO_PROPOSAL Encryption mismatch.The 56-bit client is
attempting to connect to the Contivity gateway
configured as 3DES.
LOG_REMOVE Unable to remove previous session log file.
Check for DOS file protection issue.
LOG_RENAME Unable to rename previous session log file.
Check for DOS file protection issue.
IDP_SOCKETS_INIT_FAILED Windows socket initialization failed.
IDS_CANTOPENDHCP Failed to create a DHCP socket; connection will
be closed.
IDS_CONNECTIONLOST Secure connection has been lost; click Connect
to reestablish connection.