Chapter 3 Using certificates 83
Configuring the Contivity VPN Client
a In the General tab, enable Automatic/Unattended startup. Enter the
password.
b In the Log tab, enable Send logs to file, and Browse to a file.
c In the LDAP tab, enter configuration info for the Entrust Directory server.
4 You must start the service. You may set it up to start up automatically on
reboot.
Configuring Roaming Profile Clients
The following is the required software:
• Contivity VPN Client V05_01.103
• Entrust Entellegence 5.02 or newer
There are three Entrust Dynamic Link Libraries (DLL) that must be placed in the
WINNT directory:
• kmpapi32.dll version 6.0.541.1210
• enter.dll version 6.0.520.1241
• etsesn32.dll version 6.0.531.1220
Place the edited entrust.ini into the C:\WINNT directory.
Entrust Entellegence or the CVC provides Roaming Profile support
independently, or both can co-exist together on the same PC. You do not have to
install Entrust Entellegence Client for the CVC to support Roaming Profiles.
To Next Page
Loading...
