Nortel VPN Client - Entrust Certificate Enrollment Process

Chapter 3 Using certificates 75
Configuring the Contivity VPN Client
5 If you have a PKI server located behind the firewall and the Contivity
gateway, enter the LDAP user name and password and the IP address or host
name of the Contivity gateway.
6 Choose whether to dial in automatically.
7 Click on Finish.
Entrust certificate enrollment process
The following procedures describe getting a certificate when the Entrust PKI
server is located either behind the firewall in front of the Contivity gateway, or
behind both the firewall and the Contivity gateway.
1 Double-click on the Contivity VPN Client icon.
The Contivity VPN Client screen appears.
2 Select File > Connection Wizard.
The New Connection Profile screen appears.
3 Enter a name and description; then click on Next.
The Authentication Type screen appears.
4 Select Digital Certificate; then click on Next.
The Digital Certificate Type screen appears.
5 Select Entrust Digital Certificate; then click on Next.
The Entrust Certificate Profile Selection screen appears.
6 Click on Create a new Profile; then click on Next.
The Create Entrust Profile screen appears.
7 Follow the screen prompts indicating where you want to store the Entrust
Profile; then click on Next.
The Entrust Profile Name screen appears.
8 Enter a profile name (this is the name of the local .epf file — do not include
the .epf extension) and password; then click on Next.
The Reference Number and Authorization Code screen appears.