42 Chapter 2 Customizing the client
311644-J Rev 00
Sample group.ini:
[ProfileNames]
1=VPN Your City
[VPN Your City]
GroupPW=password
NoSavePassword=1
The following list describes the changes you can make:
• Change the product name that is displayed during the installation process.
This also changes the product name that is added to the program folder. It
does not change the name that is displayed on the boxes of the application
itself, only the names displayed in the Start > Programs folder. The product
name is Contivity VPN Client by default.
• Change the program folder name to which the product shortcuts are added.
The folder name is Nortel Networks by default.
• Skip the check that is made for the number of existing TCP/IP bindings. You
can also do this from the command line using the switch:
-SKIPBINDCHECK
If both the setup.ini switch and command line switch are used, the command
line switch takes priority.
• Skip all the installation screens (except for the license screen). This is the
same as using -AUTO on the command line. If used in conjunction with
-AUTO, the command line switch takes priority.
You can skip adding the password change icon in the program folder. You can
change the password from the menu of the task bar icon that is created when the
tunnel is established. The password change application is unnecessary but is
maintained for backward compatibility.
Custom icons
You use the custom client icon facility to insert your corporate icons in place of
the existing icons for the client. There are four Nortel Networks icon groups that
you can replicate, and within each of the four, you should create different
indicators that imply activities such as sending or receiving data or establishing a
connection.
To Next Page
