82 Chapter 3 Using certificates
311644-J Rev 00
10 The Create Profile dialog box appears.
11 If you see two options at the top of the Create Profile dialog box, click Create
Desktop Profile. Do not click Create roaming profile; you use this option to
create roaming users.
12 Type a name for the Roaming Profile in the Name field.
13 In the Location field, specify a location for the Roaming Server profile, or
accept the default.
14 In the Password field, type a password.
15 In the Confirm field, retype the password and click OK.
16 Depending on your company’s security policy, one or more Authorization
Required dialog boxes may appear. Authorize the transactions if required, and
click OK.
17 A dialog box appears, displaying the distinguished name of the Roaming
Server you have just added, along with the location of the .epf file.
Install and Configure the Roaming Profile Server
Required software: Entrust Authority Roaming Server 6.0
1 Make sure you have received the Roaming Administrators Profile files and
entrust.ini files. Place them on the hard drive. Place the entrust.ini into
C:\WINNT.
2 Install Software. No license is required; if you select the configure utility, the
software will go there.
3 Configure your Roaming Server:
Note: This begins the procedure to create a roaming profile
administrator from RA.
Note: If you did not select Create Profile in Step 6, the New User dialog
box closes and you are returned to Entrust/RA. To open the Create
Profile dialog box from Entrust/RA, right-click the Roaming Server
entry in the right pane and click Create Profile in the pop-up menu.
To Next Page
Loading...
