Nortel VPN Client - Page 57

Chapter 2 Customizing the client 57
Configuring the Contivity VPN Client
If you are using user name, password logon:
extranet.exe -auth 0 -user <username> -pwd <password> -serverip
<server ip>
extranet.exe -auth 10 -profile <profilename> -user <username> -pwd
<password> -serverip <server ip>
If you are using the Axent hardware token:
extranet.exe -auth 1 -user <username> -serverip <serverip> -gid
<gid> -gpwd <group password>
extranet.exe -auth 10 -profile <profilename> -user <username>
-serverip <serverip> -gid <gid> -gpwd <group password>
If you are using SecurID hardware token:
extranet.exe -auth 2 -user <username> -pin <PIN> -code <tokenCode>
-serverip <server ip> -gid <group id> -gpwd <group password>
extranet.exe -auth 10 -profile <profilename> -user <username> -pin
<PIN> -code <tokenCode> -serverip <server ip> -gid <group id> -gpwd
<group password>
If you are using a simple group Id and password:
extranet.exe -auth 3 -user <username> -pwd <password> -serverip
<server ip> -gid <group id> -gpwd <group password>
extranet.exe -auth 10 -profile <profilename> -user <username> -pwd
<password> -serverip <server ip> -gid <group id> -gpwd <group
password>
If you are using an Axent software token:
extranet.exe -auth 4 -axentPath <axentpath> -serverip <server ip>
-gid <group id> -gpwd <group password>
extranet.exe -auth 10 -profile <profilename> -axentPath <axentpath>
-serverip <server ip> -gid <group id> -gpwd <group password>