Features unique to 2nd generation series (cannot be taken across) :
FM configurations
Envelope level tracking
Envelope level note
Envelope A-D repeat
Envelope sustain rate
Envelope sustain time
Oscs start phase
Arp output channel
Filter overdrive curve
Oscs filter bypass
Effects bypass
Comb filter speed
Comb filter depth
Comb filter spread
Comb filter freq wheel
Comb filter boost wheel
Distortion output level
Distortion gain compensate
Distortion curve
Chorus delay
Chorus LFO wave
Chorus speed 2
Chorus inertia
Chorus stereo width
Chorus type : Ensemble
Chorus type : Rotary speaker
LFO delay fade
LFO slew amount
Drum played as
Global input/switch settings
Global aftertouch tx option
Global velocity tx option
Global arp kbd note tx option
Global sysex tx delay
Global temp display time
Arp transpose zone settings
All external part settings
Drum maps
Digital i/o card options
Squarewave pulse width compatibility
Before OS4.0, maximum or minimum setting of “width” (+63 or –64) for an oscillator set to square wave gave a 5% pulse width.
For compatibility with series 2, this has changed to 0% (ie silence).
OS4.0 does not automatically adjust this.
Few programs use these extreme settings and it is unlikely that any change will be heard.
However, if upgrading to OS4.0 has made any of your programs silent or distinctly different, please check oscillators using square
wave and reduce extreme settings of width by 3 or 4 counts.
COMPATIBILITY WITH OTHER NOVATION PRODUCTS
113
To Next Page
Loading...
