43
5.3.3 NTN bearing registered in application
The bearing parameters which is necessary for the abnormality judgment of the bearing are registered
in the application. The bearing parts numbers (as a guide) registered in the application are as follows.
When selecting the bearing to be measured, if you do not know the bearing parts number to be registered,
please inquire to our company. In addition, if there is a special bearing made by our company that is not
registered in the application, please inquire to our company.
Examples of bearing parts number that are registered in application
A) General radial bearings described in Ball and Roller Bearings catalog and the bore diameter
number is from 00 to 40.
B) Angular contact ball bearings (except some) and cylindrical roller bearings (except some)
described in Precision Rolling Bearings catalogue.
C) General rolling bearing unit described in Bearing Units catalog.
D) Old standard bearings made by our company (1212K, 5206, LH-22222B etc.)
To Next Page
Loading...