7
1 Introduction
Thank you indeed for purchasing the NTN PORTABLE VIBROSCOPE (referred to “this device”
afterward) this time. Please read this Instruction Manual well to use this device correctly before you use
it. Moreover, please keep this Instruction Manual carefully in order to refer to it at any time if necessary.
1.1 Outline and features of this device
This device is a simple type vibroscope
*1
excellent in portability and operability.
By selecting
*2
a bearing parts number from list and creating the measurement point,
FFT analysis
*3
and the judgement of the measured vibration data can be performed.
The FFT analysis result can be displayed on the tablet equipped with iOS which you have.
The measured and analyzed results are saved in the tablet
*4
and can be converted into CSV format.
The CSV data can be imported to a PC which you have by way of iTunes.
*1 : The calibration function is not provided in this device.
*2 : The customer can add the bearing parts number which has not been registered yet in the list.
*3 : The inspected result is a reference and does not guarantee the state of the bearing.
*4 : The volume of data that can be saved changes depending on the capacity of your tablet.
1.2 Necessary equipment
The tablet equipped with iOS is necessary to use this device. The tablet is not attached to this device,
and you have to prepare it. Because the internet line is used when dedicated application (referred to
“application” afterward) is installed into the tablet, communication contract with the telecommunication
enterpriser is necessary. The customer must bear the communication charge. Please confirm "2.2
Operating environment" for the details of the operating environment of each equipment.
1.3 Sales and restrictions in use
This device conforms to the legal regulation of Japan and other countries, and the applicable countries
are described on the nameplate of this device and the packing box. When this device is used in countries
other than the described countries, our company cannot assume any responsibility at all.
1.4 SSID
This device has individual SSID allotted to each device. SSID described on the nameplate on the back
of this device needs to be selected from the Wi-Fi setting of the application to perform the connection
process. In addition, please check SSID seal attached when you purchased this product or seal labeled
on the side of packing box to confirm SSID.
1.5 Install and update of software
It is necessary to install the dedicated application into the tablet before you use this device. Please
install the application in accordance with "4.1 Preparation of application" Moreover, please get the
application of latest version in accordance with the similar procedure.
To Next Page
Loading...