8
1.6 Disclaimers
For operation of the related systems such as software and hardware of this device, the scrupulous
care is taken. However, our company doesn't guarantee at all that there is neither a misprint nor a
bug in the program, that there is no error in the bearing data, or that there is no inconvenience which
does not conform to the usage purpose of users. Moreover, there is a possibility that an error is
caused in the measurement result due to the difference in measuring method.
The results of measurements such as the OA value, the FFT analysis result, and the judgment result
obtained by using this device do not guarantee the state of the measured bearing or things and do
not guarantee the provision of a specialized advice on the individual case. The customer should
make the final judgment concerning the state of the bearing, with the reference to the measurement
results with this device.
The criterion value for FFT measurement judgement with which the bearing damage judgment is
performed should be set by the customer based on the experiences of the customer etc. The validity
of the value is not guaranteed by our company at all. Moreover, our company doesn't assume the
responsibility of any damage and the disadvantage etc., that occur because of the improper setting
of the FFT measurement judgment criterion value.
The application used with this device is operated on the operating environment described in the
Instruction Manual, but operation is not guaranteed for all the tablets etc. Our company doesn't
guarantee that the application can be operated on any tablet etc. customer uses.
The measurement data etc. saved in the tablet customer uses has a possibility of disappearing
without previous notice due to convenience in the system operation or an inevitable trouble etc. Our
company does not guarantee at all against any damage or disadvantage etc. caused by it. Moreover,
our company doesn't owe the obligation for restoration of the data that has disappeared.
Our company doesn't guarantee the measurement result when the measurement is performed by
the usage which does not follow the procedure described in the Instruction Manual. Moreover, our
company doesn't guarantee against the breakdown etc. that occurs when the device is not used or
kept as described in the Instruction Manual.
This device complies with IP65 protective class for dustproof and waterproof property, but our
company doesn't guarantee against the breakdown etc. that occurs when this device is used or kept
in a very bad environment such as a place where a lot of dust always exists or where the device is
exposed to the moisture.
Regarding the contents of the system such as software and hardware for this device and the
Instruction Manual, the appearance and specification etc. of this device might be changed without
previous notice in order to respond to the technical advancement and the improvement. Our
company doesn't assume at all the responsibility of damage and the disadvantage etc. caused by
the change.
By our convenience, it is likely to stop or discontinue completely the service of the upgrade etc. for
the application. Our company doesn't assume at all the responsibility of the damage and the
disadvantage etc. caused by the stop, discontinuance or the end etc.
To Next Page
Loading...