Revision 1.03
iii
Proprietary Information and Disclaimer Notice
All information and graphic images contained within this manual are the sole property of Nu-
comm, Inc. and are issued in the strictest of confidence. This material may not be reproduced,
stored, copied, or converted in any form, nor shall it be disclosed to others or used for manufac-
turing or any other purpose without the written permission of an authorized Nucomm represen-
tative.
Nucomm, Inc. has made every effort to ensure the accuracy of this material at the time of printing.
However, as the specifications, equipment, and this manual are subject to change without notice,
Nucomm, Inc. assumes no responsibility or liability whatsoever for any errors or inaccuracies that
may appear in this manual, or for any decisions based on its use. This manual is supplied for
informational purposes only and should not be construed as a commitment by Nucomm, Inc.
Warranty
Equipment manufactured by Nucomm, Inc. is warranted to meet all published specifications and
to be free from defects in material and workmanship within a period of two years from date of
shipment from Nucomm. The company’s liability under this warranty is limited to:
• Servicing or adjusting equipment.
• Replacement of defective parts.
Any equipment returned to the factory shall have the freight paid for by the buyer.
Equipment showing damage by misuse, abnormal conditions of operation, or attempts to repair
by other than authorized service personnel shall be excluded from this warranty. Nucomm, Inc.
shall in no event be responsible for incidental injury or property damage. Since Nucomm, Inc.
has no control over conditions of use, no warranty is made or implied as to suitability for the
customer’s intended use, beyond such performance specifications as are made part of the pur-
chase order. There are no warranties expressed or implied, except as stated herein. This limi-
tation on warranties shall not be modified by verbal representations.
Shipping Damage
Equipment shipped FOB Nucomm, Inc.; shall become the property of buyer upon delivery and
receipt from carrier. Any damage in shipment should be handled by the buyer directly with the
carrier. Immediately request the carrier’s inspection upon evidence of damage in shipment.
Field Service
Nucomm products are designed with easy access to components to facilitate service. However,
some Nucomm modules cannot be service in the field. To prevent voiding of the Nucomm
warranty, please contact Nucomm before servicing or making any repairs. The user is cautioned
to read all module descriptions in this manual. Warnings are included in the circuit descriptions
and on certain modules themselves.
Replacement Modules
Troubleshooting to the component level is often not cost-effective and frequently impossible.
Often the practical method of effecting repairs is to substitute known good spare modules for
suspect units. Replacement modules for Nucomm’s standard product line are usually available.
To Next Page
