Nvidia DGX H100 - Managing CPU Mitigations

NVIDIA DGX H100 Service Manual
3. Tighten the two lid screws on the port side of the motherboard tray, as shown in the following
gure:
4. Tighten the two lid screws on the connector side of the motherboard tray, as shown in the fol-
lowing gure:
5.6. Insert the Motherboard Tray into the
Chassis
1. Insert the motherboard tray into the chassis partially. Open the ejection levers before you insert
the motherboard tray into the chassis:
32 Chapter 5. Motherboard Tray - Removal and Installation