Oceanic SAMM - Page 44

SAMM User Manual
42
Command
Action
Select multiple non-adjacent
charts

In the chart database table, click on the first chart, hold Ctrl,
and click on each subsequent chart.
Hide charts from chart
database table

In the chart database table, right-click on the chart and click
Hide.
Show hidden charts in chart
database table

In the display options and legend panel of the Charts tab,
click the Show hidden charts checkbox.
Unhide hidden charts

After showing the hidden chart, in the chart database table,
right-click on the charts and click Unhide.
Turn hide/unhide a chart from
the auto loader while keeping
the chart loaded

In the chart database table, right-click on the chart and click
Pin loaded chart/Unpin loaded chart.
Unload manually loaded chart
from the chart database table

In the chart database table, right-click on the chart and click
Unload.
Enable/Disable forced display
of a loaded chart in the
mosaic window

In the chart database table, check/uncheck the box next to
the chart.
 In the chart database table, right-click on the chart and click
on Disable charts or Enable charts.
Restrict the auto load feature
to a certain number of
raster/vector charts

In the auto load panel of the Charts tab, ensure the Auto
load box is checked, then enter the number of raster charts
in the Raster field and the number of vector charts in the
Vector field.
Restrict the auto load feature
to a certain number of charts
by chart type

In the auto load panel of the Charts tab, ensure the Auto
load box is checked, then click the Load by chart type
button and enter the number of each type of chart in the
chart type fields.
Turn the world imagery on/off

In the online chart panel of the Charts tab, ensure the Online
chart box is checked and click on the desired service
(imagery, topography, weather).
Disable the auto load function

In the auto load panel of the Charts tab, click the box next to
the Auto load field to uncheck it.
Set the current settings as
default

In the display options and legend panel of the Charts tab,
click the Set as default button.
Preview the chart

In the chart database table of the Chart preview tab, click on
the chart.