Oceanic SAMM - Attribute Contacts

SAMM User Manual
77
Contact
s Window
Element
Command
Action
Thumbnail List and
Contact Display
Show only those
contacts in the staging
table in the thumbnail
list and contact display

In the staging table, select the contacts to
show and click the Show contact(s) icon in
the toolbar.
 In the staging table, select the contacts to
show, right-click and click Show contact(s).
Contact Display
Zoom in on area

In the toolbar, click the Pan/Zoom icon, and
in the contact display click and drag a box
around the area.
 In the contact viewer, right-click on the tile
and click Pan/Zoom, and click and drag a
box around the area.
 In the contact display, hold Shift and click
and drag a box around the area.
Zoom in to center

In the contact display, roll the mouse wheel
away from you.
 In the contact display, press the + key.
 In the contact display, use a two finger scroll
toward you on a laptop track pad.
Zoom out from center

Roll the mouse wheel toward you.
 Press the - keys.
 Use a two finger scroll away from you.
Zoom to contact

In the contact display when zoomed in,
press the spacebar.
Pan

In the toolbar, click the Pan/Zoom icon, and
in the contact display click and drag.
 In the contact viewer, right-click on the tile
and click Pan/Zoom, and click and drag.
 In the contact display, hold Ctrl and click and
drag.
Staging Table
Add contacts to the
staging table

In the contact display, right-click on the tile
and click Add contact(s) to staging table.
 In the thumbnail list, right-click on the
selected thumbnails and click Add
contact(s) to staging table.
Resize columns

Hover over the column break line, click, and
drag.
Hide/Unhide Columns

Right-click on the column name row and
click the checkbox next to the field name.
Rearrange the column
order

Click on a column name and drag it to the
desired location.
8.3 Attribute Contacts
SAMM enables the user to make complete contact reports through classification and
measurement of the contacts. These processes are used to define contact properties, so that
data about the contacts may be transmitted with the images through your workflow.