OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ote.com 37
Set Time/Date
1. Scroll the wheel to “5. Utilities” and press the wheel to enter.
2. Scroll the wheel counter-clock wise to “7. Set Time/Date” and press
the wheel to enter.
3. The cursor the will blink on the hour section. Scroll the wheel until the
hour is set to the current local hour and press the wheel to set the
hour.
4. The cursor will then blink on the minute. Scroll the wheel until the
minute section is set to the current local minute and press the wheel
to set the minute.
5. The cursor will then blink on the “AM/PM” section. Scroll the wheel to
select AM or PM and press the wheel to set it.
6. The cursor will then blink on the day section of the date (Day/Month/
Year). Scroll the wheel to select the current local day and press the
wheel to set the day.
7. The cursor will then blink on the month section of the date (Day/
Month/Year). Scroll the wheel to select the current local month and
press the wheel to set the month.
8. The cursor will then blink on the year section of the date (Day/Month/
Year). Scroll the wheel to select the current local year and press the
wheel to set the year.
The time and date is now set.
The on-board control panel is equipped with a back up battery supply
which will store the date if the main power cord is disconnected.
To Next Page
Loading...
