OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ote.com 64
If there is no power to the machine, it could be that the fuse for the main
power supply is blown or that the main circuit breaker has tripped.
1. Check the breaker switches and make sure they are in the on position.
2. Open the fuses holders to check the condition of the fuses. If they have
blown, replace them.
The battery back up also has fuses that can be blown as well. If they are
blown, they can be replaced as shown below.
Breakers Fuses
Appendix
Fuses and Breakers
To Next Page
Loading...
