OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ote.com 55
One nal check to make on the cell o-ring will be to physically check and
make sure the upper surface of the o-ring sticks up above the o-ring ledge
around the entire circumference of the cell.
If the o-ring is damaged and unable to seal, the o-ring will need to be
replaced.
Cell O-ring Ledge
Upper O-ring
Surface
To Next Page
Loading...
