Oki B4100 User Manual (English)

Other manuals for Oki B4100

User Guide90 pages

Manual94 pages

Setup Guide40 pages

Software Installation Guide2 pages

Specification2 pages

Questions and Answers:

N
Nicholas WalkerAug 28, 2025
What to do if my Oki B4100 shows FEED JAM OR EXIT JAM?
- M
  Melissa GreeneAug 29, 2025
  To fix a FEED JAM or EXIT JAM on your Oki Printer, remove the tray and clear any misfed sheets. Open the top cover, being mindful that the fuser area will be hot and is clearly marked. Carefully lift out the image drum (with the toner cartridge) and remove any jammed sheets from the paper path. Re-install the image drum with the toner cartridge, close the top cover, and press down to latch it. The printer will warm up and reprint the lost page. If the edge of the jammed paper protrudes from the exit, reinstall the image drum, close the top cover and switch the printer on. Remove the jammed paper from the exit when the exit roller begins rotating after a few seconds after switching on. However, if the jammed paper cannot be removed, contact a service representative.
K
kylebriggsAug 28, 2025
Why is my Oki Printer producing smeared or blotched prints?
- S
  Sara BellAug 28, 2025
  If your Oki Printer is printing smeared or blotched output, it could be due to dirty rollers, toner dropped inside the printer, or an image drum problem. Try replacing the image drum and toner.
M
Michael PerezAug 27, 2025
Why is the print from my Oki B4100 light or blurred?
- S
  sweeneykristinAug 27, 2025
  If the printed page from your Oki Printer appears light or blurred, it could be due to several reasons. First, check if the toner is low and replace the toner cartridge if needed. Ensure that you are using paper meant for laser printers. Also, a dirty LED array can cause this issue, so try cleaning it.
M
michealirwinAug 27, 2025
Why is my Oki Printer printing faint pages?
- B
  beth51Aug 27, 2025
  If the entire page prints faintly on your Oki Printer, it could be due to an empty toner cartridge. Pages tend to get fainter as the toner is used up, so install a new toner cartridge. Alternatively, the LED array might be dirty, so try cleaning it.
P
Paula MercerAug 27, 2025
Why is my Oki Printer printing blank sheets?
- S
  Samantha DorseyAug 27, 2025
  If your Oki Printer is printing blank sheets, the issue might be due to the image drum cartridge not being properly installed. Try reinstalling it. Another possible cause is an empty or missing toner cartridge; in that case, install a new toner cartridge.
M
Marie CardenasAug 26, 2025
How to fix INPUT JAM on Oki Printer?
- A
  Amanda MartinAug 26, 2025
  To resolve an INPUT JAM on your Oki Printer, start by removing the paper tray, then remove any crumpled or folded paper. Check and remove any paper from the underside of the printer. Replace the paper tray. After removing the damaged paper, the printer should continue printing.
R
rodriguezloriAug 25, 2025
What to do if my Oki B4100 is ready but not printing?
- H
  henrychavezAug 26, 2025
  If you try to print and nothing happens, but your Oki Printer indicates it is ready to receive data, there might be a configuration error. Check the cable connection to ensure it's properly connected. If more than one printer is available, make sure your printer has been selected as the default.
G
george42Aug 25, 2025
How to fix a FEED JAM or EXIT JAM error on an Oki Printer?
- A
  Amy MurrayAug 25, 2025
  If your Oki Printer is experiencing paper jams with a 'FEED JAM OR EXIT JAM' error, follow these steps: First, remove the tray and clear any misfed sheets. Then, open the top cover and carefully lift out the image drum, complete with the toner cartridge. Remove any jammed sheets from the paper path. Re-install the image drum complete with toner cartridge, ensuring that it correctly locates into the slots on each side of the printer. Close the top cover and press down to latch it closed. The printer will warm up and start printing; the lost page will be reprinted.
B
Blake GraySep 10, 2025
Why does my Oki Printer print entire page faintly?