44205301TH Rev.1
50 /
Oki Data CONFIDENTIAL
3. Set up
(3)-3. Remove the side cover. (3)-4. Install the memory.
Loose the screw (one place).
Remove the side cover.
Pull it outward to remove while holding the
upper edge of the side cover to lift.
Notes! • Do not touch any electrical parts and terminals of connectors.
• Be careful to install the memory in the proper direction. A notch on the
terminal of the memory is matched to the connector of the slot.
Push the memory to the printer side
and fix it firmly.
Discharge any static electricity by
touching a grounded metal object
before taking the memory out of the
package.
Insert the memory into the slot.
To Next Page
Loading...
