Oki C610N - Fan(Fuser); Belt Motor; High-Voltage Board;Cover Open Switch; MPT Assy

44205301TH Rev.1
74 /
Oki Data CONFIDENTIAL
4. Component replacement
Air
Claw B
Claw B
(Black)
(Silver)
Claw A
4.2.16 FAN(Fuser) / Belt motor/ High-voltage board/
Cover open switch
(1) Remove the left side cover. (See section 4.2.3)
(2) Remove the screw
(silver, No:42920406) and connector, and remove the belt
motor
.
(3) Remove the connector, and rotate the FAN (Fuser)
clockwisely to remove.
(4) Remove the connector and disengage the claw A (2 places), and remove the
cover open switch
.
(5) Remove the 2 screws
(silver, No:42920406 and black, No:42932708) and
connectors (2 places), and disengage the claw B (7 places). Remove the high-
voltage power supply
.
CN4
CN2
CN3
CN1
TR-KTR-M
High-voltage power supply
Belt thermistor
Cover open switch
FAN(Fuser)
TR-YTR-C
4.2.17 MPT Assy
(1) Open the MPT Assy
.
(2) Remove the stoppers (2 places) while pushing the arms (2 places) on MPT
Assy
outside, pull the supporters (2 places) in the direction of the arrow and
remove them, and remove the MPT Assy
.
Arm
Stopper (2 places)
Supporter (2 places)