Oki C610N - Shaft Eject Assy (FU); Shaft Eject Assy

44205301TH Rev.1
78 /
Oki Data CONFIDENTIAL
4. Component replacement
4.2.21 Shaft eject Assy (FU)/ Shaft eject Assy(FD/ Eject
sensor
(1) Remove the eject Assy. (See section 4.2.15)
(2) Disengage the claws (2 places), and disassemble the Assy into guide eject
lower
and guide eject upper .
(3) Remove the gear idle eject
, , and remove the shaft Assy eject (FU)
and shaft Assy eject (FD)
.
(4) Remove the lever eject sensor
and eject sensor .