Oki C810 - User Maintenance Menu Functions; Maintenance Menu (for End-Users)

44015503TH Rev. 1
124 /
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.3 User maintenance menu functions
5.3.1 Maintenance menu (for end-users)
Some general menu categories on the operator panel of C830 serve as maintenance menus
(but are not system maintenance menus).
The options available in the menus are as follows:
Default setting in shade area
Option Settings Function
System
Adjust
Time Period to Go
Power Save Mode
5 min
15 min
30 mi
60 min
240 min
Sets the time to establish the power save
mode.
Clearable
Warning
Online
Job
Sets the timing for clearable warnings to
disappear.
Auto Continue
On
Off
Sets whether to recover the printer
automatically upon a memory overflow or
tray request.
Manual Timeout
Off
30 sec
60 sec
Sets the time to wait for feeding paper for
printing a job by manually loading the paper.
The job is cancelled when the paper is not
loaded within the time.
Option Settings Function
System
Adjust
(cont.)
Wait Timeout Off
5 sec
10 sec
20 sec
30 sec
40 sec
50 sec
60 sec
90 sec
120 sec
150 sec
180 sec
210 sec
240 sec
270 sec
300 sec
Sets the time period between stopping data
reception and forced printing of a job. When
a PostScript job, the job is not printed, being
cancelled.
Low Toner
Continue
Stop
Sets the printing operation when a state
that the printer is low on toner is detected.
Continue allows the printer to continue
printing while remaining online. Stop makes
the printer offline.
Jam Recovery
On
Off
Sets whether to perform recovery printing
when a paper jam occurs. Off cancels a job
including the page being printed when the
jam occurs.
Error Report
On
Off
Prints an error report when an internal error
occurs. This option is available only for
PostScript and PCL XL.
Print
Position
Adjust
X Adjust
0.00 mm
+0.25 mm to
-2.00 mm
+2.00 mm to
-0.25 mm
Adjusts the position of a whole printing image
(in 0.25-mm increments) perpendicular
to the direction of paper movement (i.e.
horizontally).