沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX −110／130
Priority
Status Message Ready
LED
Atten
LED
Function Status level
Error code
Status code
3
314 1
2
3
Wait a Moment
Network Initializing
Varies
Varies
This appears when the NIC initialization is occurred, as the setting was changed. Normal 30993
315.9
1
2
3
Wait a Moment
Message Data Processing
Varies
Varies
Indicates that message data to be updated is being processed. Normal 40825
315.9
1
2
3
Wait a Moment
Message Data Writing
Varies
Varies
Indicates that message data to be updated is being written. Normal 40826
315.9
1
2
3
Power Off/On
Message Data Received OK
Varies
Varies
Indicates that message data to be updated has been written successfully. Normal 40827
316 1
2
3
Check Data
Message Data Write Error<%CODE%>
Varies
Varies
Indicates that writing of message data to be uploaded has been failed.
%CODE% is a decimal value (one digit) and represents the cause of failure in writing.
= 1 … FAIL: Other errors.
= 2 … DATA_ERROR: Hash check error in data reading/writing, or abnormal FLASH
= 3 … OVERFLOW: Downloading failure due to FLASH memory full at starting or during
writing in a language file
= 4 … MEMORYFULL: Memory reservation failure
= 5 … UNSUPPORTED_DATA: Downloading data unsupported on the printer
Error
(ONLINE)
40828
316.5
1
2
3
Receiving Data Timeout
Press OK Button for Restoration
Please see HELP for details
Varies
Blink
A timeout occurred while retrieving data, under the connection by Port9100, LPR, FTP,
IPP, WSD or E-mail receiving.
(The connection by NetworkTwain and WSD Scan is excepted.)
Error
(ONLINE)
40364
317.1
1
2
3
Firmware Update Error
Please retry
If network doesn't work, please try firmware update
over USB
Varies
Varies
Indicates that firmware update has failed. In this case, firmware update needs to be
executed again, so the printer must be online.
Error
(ONLINE)
40427
318 1
2
3
Open Stacker
Face Up Stacker
Please see HELP for details
Off Blink
When a page was intended to print on the face-up stacker, with the stacker cover closed,
the controller should raise this error.
Some printing media must be handled with the face-up stacker, such as a business card,
which may be stopped between transfer-rollers of the face-down stacker or the finisher.
Error
580
40925
319 1
2
3
The data was deleted because a duplex printing error
occurred
Check the paper and paper settings, then print again.
To turn off the display, press OK
Please see HELP for details
Off Blink
Indicates that duplex printing is requested to the paper not supporting duplex printing;
therefore, the print data has been deleted and the printing has been cancelled.
Error
455
40396
320 1
2
3
The data will be deleted due to an overprint feature
error
Check the paper and paper settings, then print again.
To turn off the display, press OK
Please see HELP for details
Off Blink
Indicates that spot color overprint is requested to the paper not supporting spot color
overprint; therefore, the print data has been deleted and the printing has been cancelled.
Error
456
40397
322 1
2
3
The data will be deleted due to an overprint feature
error
Mount the duplex printing unit and print again. To turn
off the display, press OK
Please see HELP for details
Off Blink
Indicates that spot color overprint is requested with no duplex (spot color overprint) unit
installed; therefore, the print data has been deleted and the printing has been cancelled.
The status of non-installation of a duplex unit indicates that the printer is turned on without
installation of a duplex unit so that the printer recognizes no duplex unit; not indicate that a
duplex unit was installed, recognized and then removed.
Error
458
40399
323 1
2
A spot color printing error has occurred. Data will be
erased.
Check the paper and paper settings, then print again.
Off Blink
Indicates that printing on unusable custom media or spot color is requested; therefore, the
print data has been deleted and the printing has been cancelled.
Error
459
40393
To Next Page
Loading...
