Setting Power Save Mode
Appendix
Setting Up
2
Printing
3
Before use
1
Basic Device Operations
4
Index
- 111 -
4.Basic Device Operations
This chapter explains how to set power save mode, which reduces device power consumption, how
to check print quantities, the service life of consumables, remaining maintenance unit quantities and
service life, and how to cancel printing.
You can set the printer to enter power save mode from the standby screen. Further, you can also set
the printer to enter sleep mode from power save mode.
Setting Power Save Mode
Setting Power Save Mode
The device can be set to enter power save mode
from standby mode when no printing or data has
been received after a xed period of time.
The default factory setting is to enable power
save, so implementing this procedure is
unnecessary.
1
Press the scroll button or .
2
Select [Admin Setup], and press the
[OK] button.
3
Enter the administrator password, and
press the [OK] button.
Memo
In the default factory settings, the administrator
password is [aaaaaa].
4
Select [Power Setup], and press the
[OK] button.
5
Select [Power Save], and press the [OK]
button.
To Next Page
Loading...
Need help?
General
