- 94 -
Printing from Trays
AppendixSetting Up
2
Before Use
1
Printing
3
Basic Device Operations
4
Index
4
Set the paper with the print surface
face-down.
Note
Do not exceed the " " symbol ( ) on the paper
guide when setting the paper.
Memo
Set so there is no gap between the paper and the
paper guide or paper stopper.
5
Use the paper guide to secure the
paper.
6
Return the paper cassette to the tray.
Printing from Trays
Open the le to be printed on the PC, and
select [Paper Size], [Paper Source], and [Media
Weight] to print via the paper driver.
This section explains how to print using "Tray 1"
or "Auto" from the following printer drivers.
Windows PS printer driver
Windows PCL printer driver (P.95)
Windows XPS printer driver (P.96)
Mac OS X printer driver (P.97)
Further, this explanation uses "WordPad" for
Windows as the application used. For Mac OS X,
the example uses "TextEdit".
Reference
For how to install the printer drivers, see “Connecting the
PC” (P.61).
For how to print from the multi-purpose tray, see “Printing
from the Multi-Purpose Tray” (P.98).
Memo
Select [Auto] in [Paper Source] to automatically select the
tray holding the designated paper.
Using Windows PS Printer Drivers
1
Open the le to be printed using
WordPad.
2
Click [Page Setup] in the [File] menu.
3
Select the paper size and print
orientation, and click [OK].
4
Click [Print] in the [File] menu.
5
Click [Advanced] (or [Properties]).
To Next Page
Loading...
Need help?
General
