Oki C931dn

- 49 -
Installing the Device
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
Setting Paper
This section explains how to set the paper in tray
1 or trays 2/3/4/5.
Memo
⿟
In this section, setting paper in tray 1 is used as an
example. Set trays 2 to 5 using the same procedure.
1
Pull out the tray 1 paper cassette ( ).
2
Slide the paper guide ( ) and paper
stopper (
) to align to the size of the
paper that has been set.
3
Thoroughly sort the paper. Carefully
align the edges of the paper
horizontally.
4
Set the paper with the print surface
face-down.
Note
⿟
Do not exceed the " " symbol ( ) on the paper
guide when setting the paper.
Memo
⿟
Set so there is no gap between the paper guide or
paper stopper and the paper.
5
Use the paper guide to secure the
paper.
6
Return the paper cassette to the tray.