- 119 -
Setup to Turn OFF the Power Supply Automatically
Appendix
Setting Up
2
Printing
3
Before use
1
Basic Device Operations
4
Index
7
Press the [ON LINE] button to return to
the standby screen.
Memo
Other items can also continue to be set before
pressing the [ON LINE] button.
Setting the time before the printer
enters auto power OFF mode
You can set the time until OFF mode is entered.
The default factory setting is "4 hours".
1
Press the [Fn] key.
The numerical values input screen will
be displayed.
2
Enter [2], [0], [2], and press the [OK]
button.
3
Select the time to be set, and press the
[OK] button.
4
Press the [ON LINE] button to return to
the standby screen.
Memo
The settable times are described below.
1 hour, 2 hours, 3 hours, 4 hours, 8 hours, 12 hours, 18
hours, 24 hours
To Next Page
Loading...
