- 66 -
Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
3
Use the 10-key pad to enter the
administrator password.
The default factory-set password is
"aaaaaa". Press the [OK] button after
entering each individual character.
4
Press the [OK] button.
5
Check that [Network Setup] has been
selected, and press the [OK] button.
1
2
3
4
5
6
Admin Setup 1/2 Page
Network Setup
Print Setup
PS Setup
PCL Setup
XPS Setup
Use
Online
button
to
return
to
standby
screen
USB Setup
6
Press the scroll button several times
to select [IP Address Set], and then
press the [OK] button.
1
2
3
4
5
6
Network Setup 1/2 Page
TCP/IP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use
Online
button
to
return
to
standby
screen
NetBIOS over TCP
7
If setting the IP address manually, press
the scroll button
to select [Manual],
and then press the [OK] button.
Go to Step 8
1
2
3
4
5
6
TCP/IP
NetBIOS over TCP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby scr
Network Setup
Use Online button to return
2
Manual
Auto
1
1/1 PageIP Address Set
If acquiring the IP address automatically,
check that [Auto] has been selected, and
then press the [OK] button.
Go to Step 14
1
2
3
4
5
6
TCP/IP
NetBIOS over TCP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby scr
Network Setup
Use Online button to return
2
Manual
Auto
1
1/1 PageIP Address Set
8
Press the scroll button several times
to select [IPv4 Address], and then click
the [OK] button.
1
2
3
4
5
6
Network Setup 1/2 Page
TCP/IP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use
Online
button
to
return
to
standby
screen
NetBIOS over TCP
9
Use either the scroll buttons or the
10-key pad to enter the rst 3 digits
of the IP address, and then press the
[OK] button. Enter the next 3 digits
in the same way. When all entries are
complete, press the [BACK] button.
To move to the next box, press the [OK]
button.
1
2
3
4
5
6
TCP/IP
NetBIOS over TCP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby sc
Network Setup
Use Online button to return
xxx.xxx.xxx.xxx
IPv4 Address