- 73 -
Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
9
Click [Recommended Install] to start
the installation.
Memo
Click [Custom install] to select "PCL6 Driver" and
"XPS Driver".
10
When the following screen is displayed
during the installation, connect the
device and PC using a USB cable, and
then turn ON the device power supply.
Memo
If the display does not change even when the device
is connected, click "Install using another port".
Select the port to which the device is connected
using the "Printer port" screen, and click [Next].
11
When the installation is complete, click
[Exit].
12
In the menu screen, click [Exit]> [Yes].
13
Select [Start]> [Devices and Printers].
To Next Page
Loading...
