A
A-3 Troubleshooting
Select File Server From List
(Network Setup > Service
Setup > PServer Setup >
Bindery Setup)
Error. Cannot open bindery
connection to NDS server.
Select this server through NDS setup or disable NDS and
select it through bindery.
No NetWare file
server found.
No file server was found when Fiery queried the network to
create a list of supported servers or a list of all servers.
Check cable connections and make sure the NetWare
server is turned on.
Enter First Letters
of Server Name
(Network Setup > Service
Setup > PServer Setup >
Bindery Setup)
File server name not found.
Try again?
No file server with those letters was found when Fiery que-
ried the network. Check the name of the NetWare file
server, check cable connections, and make sure the Net-
Ware server is turned on.
View Server List,
Edit Connection
(Network Setup > Service
Setup > PServer Setup >
Bindery Setup)
No file server is selected. No file server has been added in Bindery Setup.
Add File Server
(Network Setup > Service
Setup > PServer Setup >
Bindery Setup)
All connections used.
Remove server?
You have added the maximum number of bindery servers,
which is eight. You now have the option of disconnecting
one of those servers, so as to add another.
After this Setup screen This message Means
To Next Page
Loading...
Need help?
General
